About Nonuniform Rational B-Splines - NURBS

a summary by Markus Altmann

NURBS are industry standard tools for the representation and design of geometry [ROGERS]. Some reasons for the use of NURBS are, that they: [PIEGL][ROGERS]

However, one of the drawbacks NURBS have, is the need for extra storage to define traditional shapes (e.g. circles). This results from parameters in addition to the control points, but finally allow the desired flexibility for defining parametric shapes. NURBS-shapes are not only defined by control points; weights, associated with each control point are also necessary. A NURBS curve C(u), for examples, which is a vector-valued piecewise rational polynomial function, is defined as: [PIEGL]

		sum(i = 0, n){w_i * P_i * N_i,k(u)}
	C(u) = -------------------------------------,	 (1)
	   	  sum(i = 0, n){w_i * N_i,k(u)}

where

	w_i : weights
	P_i : control points (vector)
	N_i,k : normalized B-spline basis functions of degree k

These B-splines are defined recursively as:

	        u - t_i
   N_i,k(u) = ----------- * N_i,k-1(u) +
	      t_i+k - t_i

		t_i+k+1 - u
	      ---------------  * N_i+1,k-1(u)	(2)
	      t_i+k+1 - t_i+1
and
                    / 1, if t_i <= u < t_i+1
	N_i,0(u) = <
                    \ 0, else

where t_i are the knots forming a knot vector

	U = { t_0, t_1, ... , t_m }.


The Knot Vector

The knot vector uniquely determines the B-splines as it is obvious from (2). The relation between the number of knots (m+1), the degree (k) of N_i,k and the number of control points (n+1) is given by m = n + k + 1 [PEIGL][ROGERS].

The sequence of knots in the knot vector U is assumed to be nondecreasing, i.e. t_i <= t_i+1. Each successive pair of knots represents an interval [t_i, t_i+1) for the parameter values to calculate a segment of a shape [FOLEY][WATT].

For NURBS, the relative parametric intervals (knot spans) need not be the same for all shape segments, i.e. the knot spacing is nonuniform, leading to a non-periodic knot vector of the form

   U = { a, ... , a, t_k+1, ... , t_m-k-1, b, ... , b },   (3)

where a and b are repeated with multiplicity of k+1 [ROGERS][PIEGL]. The multiplicity of a knot affects the parametric continuity at this knot [FOLEY]. Non-periodic B-splines, like NURBS, are infinitely continuously differentiable in the interior of a knot span and k-M-1 times continuously differentiable at a knot, where M is the multiplicity of the knot [ROGERS]. (In contrast, a periodic knot vector U = { 0, 1, ... , n } is everywhere k-1 times continuously differentiable.) Considering the knot vector for NURBS, the end knot points (t_k, t_n+1) with multiplicity k+1 coincide with the end control points P_0, P_n.

Since the knot spacing could be nonuniform, the B-splines are no longer the same for each interval [t_i, t_i+1) and the degree of the B-Spline can vary [WATT][FOLEY]. Considering the whole range of parameter values represented by the knot vector, the different B-splines build up continuous (overlapping) blending functions N_i,k(u), as defined in (2), over this range (Fig. 1) [WATT]. These blending functions have the following properties: [WATT][ROGERS]

  1. N_i,k(u) >= 0, for all i, k, u;

  2. N_i,k(u) = 0, if u not in [t_i, t_i+k+1), meaning local support of k+1 knot spans, where N_i,k(u) is nonzero;

  3. if u in [t_i, t_i+1), the non-vanishing blending functions are N_i-k,k(u), ..., N_i,k(u)

  4. sum(j=i-k, i){N_j,k(u)} = sum(i=0, n){N_i,k(u)} = 1, (partition of unity)

  5. in case of multiple knots, 0/0 is deemed to be zero.

1. and 4. together result into the convex hull, the control points build up for a shape defined by NURBS [WATT]. 2. and 3. show, that k+1 successive control points define a shape segment, and a control point is involved in k+1 neighboring shape segments. Therefore, changing a control point or weight influences just k+1 shape segments, defined over the interval given in 2.

Curve/Surface Definition

The previous definition of a NURBS-curve (1) can be rewritten using rational basis functions [PEIGL][ROGERS][WATT]

			  w_i * N_i,k(u)
	R_i,k(u) = ----------------------------
		   sum(j = 0, n){w_j * N_j,k(u)}
into
	C(u) = sum(i = 0, n){P_i * R_i,k(u)}.

Fig. 1: Cubic NURBS curve with associated blending functions.

A NURBS-surface is define in a similar way:

    S(u, v) = sum(i = 0, n)sum(j = 0, m) P_i,j * R_i,k, j,l(u, v) ,
where
			         w_i,j * N_i,k(u) * N_j,l(v)
R_i,k,j,l(u, v) = ---------------------------------------------------------
		  sum(r = 0, n){sum(s = 0, m){w_r,s * N_r,k(u) * N_s,l(u)}}

The rational basis functions have the same properties as the blending functions [PEIGL][ROGERS]. One point to emphasize, is their invariance under affine and (even) perspective transformations. Therefore, only the control points have to be transformed to get the appropriate transformation of the NURBS shape.

Computational Algorithm

NURBS can be evaluated effectively by using homogeneous coordinates [PEIGL][ROGERS]. The following steps perform the evaluation:

  1. add one dimension to the control points (e.g. P = (x, y) -> P'(x, y, 1)) and multiply them by their corresponding weights, i.e. in 2D: P_i(x_i, y_i) -> P_i'(w_i * x_i, w_i * y_i, w_i)

  2. calculate NURBS in homogeneous coordinates:

       C'(u) = sum(i = 0, n){P_i'(u) * N_i,k(u)}
    
  3. map "homogeneous" NURBS back to original coordinate system with:

                             / ( X1/W, X2/W, ... , Xn/W ), if W not = 0
 map( X1, X2, ... ,Xn, W) = <
                             \ ( X1, X2, ... , Xn ), if W = 0

			 sum(i = 0, n){w_i * P_i * N_i,k(u)}
   C(u) = map( C'(u) ) = -----------------------------------
			    sum(i = 0, n){w_i * N_i,k(u)}

For u in [t_i, t_i+1), the only existing blending functions to consider in evaluation of the curve at u are N_i-k,k(u), ..., N_i,k(u). An effective algorithm for the computation of the non-vanishing blending functions exists in [deBOOR pp. 132 - 135].

The Weights

As mentioned above, changing the weight w_i of a control point P_i affects only the range [t_i, t_i+k+1) (in case of a curve). The geometric meaning of the weights is shown as follows (Fig. 2) [PEIGL][ROGERS].

Defining the points:

		B = C(u; w_i = 0)
		N = C(u; w_i = 1)
		B_i = C(u; w_i not = {0, 1})


Fig. 2: Geometric meaning of weights (w_3).

N and B_i can also be expressed as:

		N = (1 - a) * B + a * P_i
		B_i = (1 - b) * B + b * P_i ,
where
		a = R_i,k(u; w_i = 1)
		b = R_i,k(u).

The following identity is obtained from the expression of a and b:

	(1 - a)/a : (1 - b)/b = P_iN/BN : P_iB_i/BB_i = w_i ,

which is called the cross- or double ratio of the four points P_i, B, N, B_i. From these expressions, the effect of shape modification can be derived:


References:

[deBOOR]
C. deBoor,
"A Practical Guide to Splines",
1978, New York, Springer-Verlag

[FOLEY]
James D. Foley et al.,
"Introduction to Computer Graphics",
1994, Addision-Wesley

[PEIGL]
Les Piegl
"On NURBS: A Survey",
Jan 01, 1991, IEEE Computer Graphics and Applications, Vol. 11, No. 1, pp. 55 - 71

[ROGERS]
David F. Rogers, Rae A. Earnshaw (editors),
"State of the Art in Computer Graphics - Visualization and Modeling",
1991, New York, Springer-Verlag, pp. 225 - 269

[WATT]
Alan Watt, Mark Watt,
"Advanced Animation and Rendering Techniques",
1992, New York, AMC press, Addision-Wesley


[Return to CS563 '95 talks list]

Markus Altmann / madwpi@cs.wpi.edu